Surround Mode Settings - Sony DVP-NS92V Operating Instructions Manual

Top of the range dvd player with super audio cd playback, hdmi output and precision cinema progressive technology.
Hide thumbs Also See for DVP-NS92V:
Table of Contents

Advertisement

Surround Mode Settings

You can enjoy surround sounds while playing
discs including Dolby Digital, DTS and
MPEG audio DVDs, even if you have only 2
or 4 speakers. Select the surround mode that
best suits your speaker setup.
1
Press SUR during playback.
The following display appears.
TVS DYNAMIC THEATER
2
Press SUR repeatedly to select
one of the surround modes.
See the explanations given for each item
in the following section.
For 2 speaker setups
• TVS DYNAMIC THEATER
• TVS DYNAMIC
• TVS WIDE
• TVS NIGHT
• TVS STANDARD
For 4 to 6 speaker setups
(If you select "NONE" in the setting of
"REAR" in "SPEAKER SETUP"
(page 80), you cannot select these
modes.)
• NORMAL SURROUND
• ENHANCED SURROUND
• VIRTUAL REAR SHIFT
• VIRTUAL MULTI REAR
• VIRTUAL MULTI DIMENSION
To cancel the setting
Select "OFF" in step 2.
For 2 speaker setups
When you connect a stereo TV or 2 front
speakers, TVS (TV Virtual Surround) lets
you enjoy surround sound effects by using
sound imaging to create virtual rear speakers
from the sound of the front speakers (L: left,
R: right) without using actual rear speakers.
TVS was developed by Sony to produce
surround sound for home use using just a
stereo TV. This only works when playing a
multichannel Dolby audio sound track.
If the player is set up to output the signal from
the DIGITAL OUT (OPTICAL or
SUR
COAXIAL)/HDMI OUT jack, the surround
effect will only be heard when "DOLBY
DIGITAL" and "DTS" are set to "D-PCM"
and "MPEG" is set to "PCM" in "AUDIO
SETUP" (page 78).
TVS DYNAMIC THEATER
Creates one set of LARGE virtual rear
speakers and virtual subwoofer from the
sound of the front speakers (L, R) without
using actual rear speakers and subwoofer
(shown below).
This mode is effective when the distance
between the front L and R speakers is short,
such as with built-in speakers on a stereo TV.
TVS DYNAMIC
Creates one set of virtual rear speakers from
the sound of the front speakers (L, R) without
using actual rear speakers (shown below).
This mode is effective when the distance
between the front L and R speakers is short,
such as with built-in speakers on a stereo TV.
TV
Sub
woofer
TV
,continued
47

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents