Sony DVP-NS92V Operating Instructions Manual page 71

Controlling the volume of your
AV amplifier (receiver) with the
remote
TV/DVD
switch
Number
buttons
1
Slide the TV/DVD switch to DVD.
2
Hold down [/1, and enter the
manufacturer code (see the table
below) for your AV amplifier (receiver)
using the number buttons.
3
Release [/1.
The 2 (volume) +/– buttons control the
AV amplifier's volume.
If you want to control the TV's volume
Slide the TV/DVD switch to TV.
Code numbers of controllable AV
amplifiers (receivers)
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your AV amplifier
(receiver).
Manufacturer Code number
Sony 78, 79, 80, 91
Denon 84, 85, 86
Kenwood 92, 93
Onkyo 81, 82, 83
Pioneer 99
Sansui 87
Technics 97, 98
Yamaha 94, 95, 96
z Hint
If you want to control the TV's volume even when
the TV/DVD switch is set to DVD, repeat steps 1
and 2 and enter the code number 90 (default).
[/1
2 +/–
71