Adjusting The Speaker Volume - Sony DVP-NC80V Operating Instructions (DVPNC80V) Operating Instructions Manual

Cd/dvd player
Hide thumbs Also See for DVP-NC80V Operating Instructions (DVPNC80V):
Table of Contents

Advertisement

REAR
Set this within –16 and
(10 ft/3m)
+2 ft (–4.8m and +0.6m) of
the "FRONT" setting in 1 ft
(0.3m) increments. For
example, if "FRONT" is set
to 17 ft (5.1m), "REAR"
can be set between 1 and
19 ft (0.3m and 5.7m).
Note
If each of the front or rear speakers are not placed at
an equal distance from your listening position, set
the distance according to the closest speaker.
LEVEL (FRONT)
Varies the level of the front speakers. Be sure
to set "TEST TONE" to "ON" for easy
adjustment.
The default adjustments are in parentheses.
L (0 dB)
Set this between –6 dB and 0
dB in 0.5 dB increments.
R (0 dB)
Set this between –6 dB and 0
dB in 0.5 dB increments.
CENTER
Set this between –12 dB and
(0 dB)
0 dB in 0.5 dB increments.
SUBWOOFER
Set this between –15 dB and
(–5 dB)
+5 dB in 0.5 dB increments.
LEVEL (REAR)
Varies the level of the rear speakers. Be sure
to set "TEST TONE" to "ON" for easy
adjustment.
The default adjustments are in parentheses.
L (0 dB)
Set this between –12 dB and
0 dB in 0.5 dB increments.
R (0 dB)
Set this between –12 dB and
0 dB in 0.5 dB increments.
To adjust the volume of all the speakers at
one time
Use the amplifier's (receiver's) volume
control.
TEST TONE
The speakers will emit a test tone. Use this
when you use the 5.1CH OUTPUT jacks and
adjust "LEVEL (FRONT)" and "LEVEL
(REAR)."
OFF
The test tone is not emitted
from the speakers.
ON
The test tone is emitted from
each speaker in sequence while
adjusting level.

Adjusting the speaker volume

and level
1
Select "SPEAKER SETUP" in the Setup
Display.
2
Select "TEST TONE" and set to "ON."
You will hear the test tone from each
speaker in sequence.
3
From your listening position, select
"LEVEL (FRONT)" or "LEVEL (REAR)"
and adjust the value using X/x.
The test tone is emitted from both left and
right speakers simultaneously.
4
Select "TEST TONE" and set to "OFF"
to turn off the test tone.
Note
The test tone signals are not output from the digital
jack.
73

Advertisement

Table of Contents
loading

Table of Contents