Kohler RAINDUET 24717T-E Installation Instructions

INSTALLATION INSTRUCTIONS
BEFORE YOU BEGIN
All information is based on the latest product information available at the time of publication. Kohler Co. reserves
the right to make changes in product characteristics, packaging, or availability at any time without notice.
Please leave these instructions for the consumer. They contain important information.
NOTES:
1. Flush the water supply pipes thoroughly to remove debris.
2. An in line water filter must be used with this product.
3. The highest working pressure for handshower is 0.5MPa(5 bar). If it exceeds 0.5MPa(5 bar), a pressure reducer
is needed. The highest water and environment temperature is 60°C. Please keep handshower, shower head and
the shower arm away from heater, or it may become damaged and cause injury to the user.
4. All installations should comply with the relevant requirements of AS/NZS 3500 and AS/NZS 6400.
ROUGH-IN DIMENSIONS
INSTALLATION
1355515-AN2-B
24717T-E
Multifunction Handshower-Organic
126
G1/2˝B
27
1
2
3
63.5
How to Install the Handshower
Flush both water supplies for about one minute to
remove any debris before installing the handshower(1).
Put the screen washer(2) into the shower hose(3,not
provided) connector. Connect the handshower to the
hose.
NOTE: Don't overtighten it.
Connect the other end of hose to the water supply.
RAINDUET
1