Frost Protection; Care And Maintenance; High Pressure Hose; Clean The Sieve In The Water Connection - Princess auto YL4720C-100B User Manual

Table of Contents

Advertisement

• Prior to horizontal transport: close the
cap of clean detergent bottle.
• Tilt the product towards you until it
balances on the wheels. Then move it
by its transportation handle.
• Protect the product from any heavy
impact or strong vibrations which may
occur during transportation in vehicles.
• Secure the appliance against shifting
and tipping over.
Storage
CAUTION
Risk of personal injury or damage!
Consider the weight of the appliance
when storing it.
Storing the appliance
• Park the machine on an even
surface.
• Detach spray lance from the trigger
gun.
• Push the disconnect button on the
trigger gun and pull the high-pressure
hose out of the trigger gun.
• Place the trigger gun into the storage
for the trigger gun.
• Put both spray lances into the storage
for the spray lance.
• Dirt grinder spray lance: Nozzle
towards the bottom.
• Coil the high-pressure hose and hang
it over the hose storage.
• Store the mains connection in the
accessory compartment.
• Prior to extended storage periods, as
during the winter, also observe the
instructions in the care section.
• Always store the pressure cleaner,
parts, and accessories in a place that
is inaccessible to children. The ideal
storage temperature is between 10 °C
and 30 °C. Store the power washer
indoors to prevent the water in the unit
from expanding under freezing
conditions.
• We recommend using the original
package for storage or covering the
product with a suitable cloth or
enclosure to protect it against dust.

Frost protection

ATTENTION
Appliance and accessories that are not
completely drained can be destroyed
by frost.
Completely drain appliance and
accessories and protect them against
frost. To avoid damage:
• Detach the appliance from the water
supply.
• Detach spray lance from the trigger
gun.
• Turn on the appliance "ON/OFF".
• Push the lever of the trigger gun until
no more water is escaping .
• Release the lever of the trigger gun.
• Lock the lever of the trigger gun.
• Turn off the appliance "ON/OFF".
• Store the appliance and the entire
accessories in a frost free room.

Care and maintenance

DANGER
Risk of electric shock
Prior to all work on the appliance,
switch off the appliance and pull the
power plug.

High pressure hose

The high pressure hose is specially
constructed with reinforced walls it can
be easily damaged and should be
stored carefully.
• Do not kink.
• Do not drive vehicles over the hose.
• Do not expose the hose to sharp
edges or corners. Misuse will lead to
ballooning or premature failure and will
invalidate warranty.
Clean the sieve in the water
connection
Clean the sieve in the water
connection regularly.
11

Advertisement

Table of Contents
loading

Table of Contents