1. Manuals
  2. Brands
  3. Princess auto Manuals
  4. Pressure Washer
  5. YL4720C-100B
  6. User manual

Princess auto YL4720C-100B User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
High Pressure
Washer User's
Manual
YL4720C-100B
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Please read and comply
with these original instructions prior to
the initial operation of your appliance
and store them for later use or
subsequent owners.
Apart from the notes contained herein
the general safety provisions and rules
for the prevention of accidents of the
legislator must be observed.
Warnings and notes that are attached
on the appliance provide important
notes for the safe operation.
Hazard levels
DANGER
Pointer to immediate danger, if not
avoided, which leads to severe injuries
or death.
WARNING
Pointer to a possibly dangerous
situation, if not avoided, which can lead
to severe injuries or death.
CAUTION
Pointer to a possibly dangerous
situation, if not avoided, which can lead
to minor injuries.
ATTENTION
Pointer to a possibly dangerous
situation, which can lead to property
damage.
Electric components
DANGER
Risk of electric shock.
Never touch the mains plug and the
socket with wet hands.
Check the power cord with mains Plug
for damage prior to every use. Do not
use the machine if a supply cord or
important parts of the machine are
damaged, e.g. safety devices, high
pressure hoses, trigger gun.
All current-conducting parts in the
working area must be protected against
jet water.
The mains plug and the coupling of an
extension cable must be watertight and
must never lie in water. Moreover, the
coupling may never lie on the ground.
The use of cable reels that ensure that
the sockets are at least 60 mm above
the ground is commended.
Make sure that the power cord or
extension cable is not damaged by
running over, pinching, dragging or the
like. Protect the power cords from heat,
oil, and sharp edges.
Always switch off the mains
disconnecting switch when leaving the
appliance unattended.
WARNING
The appliance may only be connected
to an electric supply that has been
installed by an electrician in
accordance with IEC 60364.
The appliance may only be connected
to alternate current. The voltage must
correspond with the type plate of the
appliance.
1

Advertisement

Table of Contents
loading

Related Manuals for Princess auto YL4720C-100B

Summary of Contents for Princess auto YL4720C-100B

  • Page 1 Pointer to a possibly dangerous situation, which can lead to property Washer User's damage. Manual Electric components DANGER YL4720C-100B Risk of electric shock. Never touch the mains plug and the IMPORTANT SAFETY socket with wet hands. INSTRUCTIONS Check the power cord with mains Plug for damage prior to every use.

  • Page 2: Safe Handling

    For safety reasons, we recommend appliance. that you operate the appliance only via Do not direct the jet against yourself or a residual current device (max. 30mA). others in order to clean clothes or An unsuitable electrical extension cable foot-wear can be hazardous.
  • Page 3 includes petrol, paint thinner and Several hours of continuous use of the heating oil. The spray mist is highly appliance can lead to numbness in the inflammable, explosive and poisonous. hands in rare cases. Do not use acetone, undiluted acids →Wear gloves.

  • Page 4: Safety Devices

    Residual risks device if the power consumption is high. Even if you are operating this product Personal protective equipment in accordance with all the safety requirements, potential risks of injury and damage remain. The following CAUTION dangers can arise in connection with the structure and design of this Wear protective clothing and safety product:...

  • Page 5: Proper Use

    Trigger gun 2. Handle Sound power level is 92dB(A) 3. Spray wand 4. Trigger gun holder Proper use 5. Wheel 6. Velcro Use this pressure washer for private households only: 7. Water outlet If connection is made to a potable 8.
  • Page 6 rotatable end-piece as indicated to Assembly secure the connection. Mount loose parts delivered with appliance prior to start-up 1. Installing the spray wand • Fit the spray wand into the gun and rotate it until the two parts are completely locked. 4.

  • Page 7: High Pressure Operation

    This high-pressure cleaner is suited to properly installed socket. work with the YILI suction hose with ATTENTION backflow vale to draw in surface water, e.g. from water butts or ponds. • The washer must be used on a secure and stable surface in a standing, Fill the suction hose with water.
  • Page 8 • During longer breaks(more than 5 WARNING! Beware of kickback when pressing the trigger! minutes), also turn the appliance off using the “OFF/ON” switch. Operation with detergent Finish operation Detergent can only be added when the • Release the lever of the trigger gun. device is operated in low pressure mode.

  • Page 9: Frost Protection

    • Prior to horizontal transport: close the cap of clean detergent bottle. • Tilt the product towards you until it balances on the wheels. Then move it by its transportation handle. Frost protection • Protect the product from any heavy impact or strong vibrations which may ATTENTION occur during transportation in vehicles.

  • Page 10: Troubleshooting

    Remove coupling from the water connection, and rinse with warm water to prevent any foreign matter from clogging the pump. ATTENTION • The sieve must not be damaged. • Pull the sieve out using flat pliers. • Clean the sieve under running water. Clean the nozzle with the needle •...
  • Page 11 Machine pulsating Air in inlet hose Allow machine to run with open Inadequate supply of mains trigger until regular working water pressure resumes. Nozzle partially blocked Check that the water supply Water filter blocked corresponds to specifications Hose kinked required NB! Avoid using long, thin hoses (min.

Table of Contents