Table of Contents
Advertisement
Assembly
Mount loose parts delivered with
appliance prior to start-up
1. Installing the spray wand
• Fit the spray wand into the gun and
rotate it until the two parts are
completely locked.
2. Connect the high pressure
hose to the trigger gun
• Connect the sliver end of the
high-pressure hose to the trigger
gun and twist the nut as indicated to
secure the connection.
3. Connect the high-pressure
hose to the water outlet
Connect the other end of the
high-pressure hose to the water outlet
on the washer and twist the black
rotatable end-piece as indicated to
secure the connection.
4. Connect the garden hose to
the water inlet
Connect the garden hose
adaptor(female coupler) to the water
inlet of the pressure washer, then
thread your garden hose(male end)
into the garden hose adaptor.
Start up
Park the appliance on an even surface.
Insert the mains plug into the socket.
Water supply
For connection values, see type plate.
ATTENTION
Impurities in the water can damage the
high-pressure pump and the
accessories.
Water supply from mains
Drawing in water from the open
reservoirs
6
Advertisement
Table of Contents
