Table of Contents
Advertisement
294
SERVICING AND MAINTENANCE
3. Disconnect the electrical connector by pushing
the release.
4. Remove the rear body side tail lamp, sliding it
away from the back of the vehicle.
Body Side Tail Lamp
1 — Rear Body Side Tail Lamp
2 — Ball Stud
5. Replace the bulb as necessary by turning and
removing the bulb housing.
Reverse Side of Tail Lamp
1 — Direction Indicator Bulb / Stop Lamp Bulb
2 — Electrical Connector
3 — Ball Studs
6. Insert the new bulb, making sure it is properly
locked.
7. Reposition the rear body side lamp assembly
on the car.
8. Reconnect the electrical connector.
9. Reinstall the body side lamp making sure to
align the ball studs.
Body Side Tail Lamp
1 — Rear Body Side Tail Lamp
2 — Ball Stud
10. Install fasteners and tighten body side lamp
assembly.
11. Finally close the tailgate.
NOTE:
It is advised referring to an authorized dealer.
Advertisement
Table of Contents
