Important Information Before Supplying Power To Unit - STIEBEL ELTRON Mini 2-1 Operation And Installation

OVERVIEW
The Mini can be used for hand washing type applications in the
U.S. and Canada:
– Restroom sinks in commercial/industrial facilities and homes
– Kitchen areas in commercial /industrial facilities and homes
– Cabins
– Special uses in photo developing shops, laboratories etc.
The Mini can also be used for whole apartments and homes
in warm climate zones such as the Caribbean region, Central
America and Mexico due to the higher ambient water
temperatures.
6.2 Important information before supplying
power to unit
Air in the cold water pipe will destroy the Advanced Direct
Coil ™ heating system of the Mini. If the water supply to the
Mini has been interrupted, for example due to the risk of frost or
work on the water pipe, the following steps must be carried out
before the unit is used again.
» 1. Turn off circuit breaker.
www.stiebel-eltron-usa.com
» 2. Open a hot water tap downstream of the unit for as long as
is necessary for the unit and the cold water pipe to be free of
air.
» 3. Turn on circuit breaker.
All information in these Instructions for Use and Installation
must be followed carefully. They provide important information
with regard to safety, operation, installation, and maintenance
of the device.
Mini Series Electric Tankless Water Heaters |
™
11