Attaching the Grip
1.
Ensure that the power is
turned off on the camera
and that the Control Lock
on the BG-N19-2 is in the
L position before attaching
the grip.
2.
Remove the contact cap
from the BG-N19-2 battery
grip. (When the BG-N19-2
is not at tached to the
camera, replace the contact
cap to protect the contacts.)
6
3.
T h e co n t a c t s fo r t h e
BG - N19-2 a re on the
bot tom of the camera,
where they are protected
by a rubber contact cover.
Remove the contact cover
from the camera before
mounting the grip.