Page 1
BG-N16-2 BATTERY GRIP Designed for the Nikon D5500 and D5600 DSLR Cameras...
Page 2
Thank you for choosing Vello The Vello BG-N16-2 battery grip offers extended shooting time and comfort when shooting in a vertical (portrait) orientation. The grip is compatible with the Nikon D5500 and D5600 DSLR cameras and accepts up to two Nikon EN-EL14/EL14a rechargeable batteries. It...
Page 3
If you notice smoke, noise, or an unusual smell from the battery pack, discontinue use immediately. Keep out of reach of children. Remove the batteries, and take the device to a Vello authorized reseller. All images are for illustrative purposes only.
Page 5
Shutter release button Battery tray compartment Battery slot 1 Slot 1 contacts Handstrap mount Battery tray lock Slot 2 contacts Tripod socket Mounting screw Battery slot 2 Nonslip grip Control lock switch 6-bay AA battery tray IR remote sensor Camera battery door holder IR remote Thumbwheel lock Power contacts...
Page 6
Re m ove t h e c a m e r a’s Slide the chamber door into power is turned off. battery chamber door. Pull the BG-N16-2’s camera gently at a 45° angle until the battery door holder for door detaches.
Page 7
Remove the power contact Rotate the thumbwheel Connect the shutter release cap, and insert the battery counterclock wise until cable from the 2.5 mm g r ip’s p owe r co n t a c t s the grip is secured to the remote cable socket on into the camera’s battery camera.
Inserting the Batteries Turn off the c amer a’s Twist the battery tray’s Nikon EN - EL14/EL14a: power, and make sure the lock counterclockwise, and Insert the first battery into grip’s control lock switch is remove the battery tray slot 1 as shown and push in the Off position.
Page 9
A A Batteries: Place six Insert and lock the battery Turn on the camera power, identical AA batteries into tray inside the battery grip. and make sure the grip’s the A A bat tery tray as control lock switch is in the indicated.
IR Remote The IR remote works with the Nikon D5500 and D5600 DSLR cameras and allows you to trigger your camera wirelessly. Make sure the shutter-release cable is plugged into the grip and camera, and that the remote is pointed at the grip’s IR sensor. The IR remote works through line-of-site, so make sure there are no obstacles blocking the signal.
ONE-YEAR LIMITED WARRANTY This VELLO product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
Page 12
www.vellogear.com All other trademarks are the property of their respective owners.