Vello BG-N19-2 User Manual page 3

Precautions
1.
The BG-N19-2 should be used only with the
compatible devices specified in this manual.
2.
Use only with batteries and battery holders
recommended in this manual. The BG-N19-2 cannot
be used with other batteries or battery holders.
3.
When the BG-N19-2 is not attached to the camera,
cover the power/signal contacts with the contact
cap. This prevents electrical shorts caused by metal
coming into contact with the power/signal contacts.
4.
When the battery holder is removed from the
grip, remove the batteries or place the holder in
a container to prevent electrical shorts caused by
contact with other metal objects.
5.
The memory card access lamp may glow temporarily
when the BG-N19-2 is mounted or removed from
the camera. This is part of the normal operation.
6.
If you notice smoke, noise, or an unusual smell from
the battery pack, discontinue use immediately.
Remove the batteries and contact Vello Customer
Service.
7.
The BG-N19-2 does not have a power switch.
Instead, use the camera power switch to turn the
power on or off.
8.
The battery level may not display properly if batteries
are inserted before mounting the grip.
9.
Remove batteries from the grip when not in use.
10.
In cold temperatures, batteries can discharge
at a faster rate. Warming up a cold battery can
recover some of its lost charge and help improve
its performance.
11.
Keep this device away from water or extreme
humidity, and store it in a dry and cool place.
12.
Keep out of reach of children.
3