Registering Your Mdx-Series Tester; Display And Keypad - Midtronics MDX-650P Instruction Manual

Registering Your MDX-Series Tester

Before using your tester, we recommend that you register it online to activate
your warranty. Registration will also make it faster and easier for you to obtain
technical support and service.
To register, log on at www.midtronics.com/warranty.html and have your serial
number ready. The number is at the bottom of the label on the back of the
tester.
If your tester needs repair, call
Midtronics Customer Service at
800.776.1995. Servicing the tester
yourself may void your warranty.
Refer to "Patents, Limited Warranty,
Service" on the back cover for
additional warranty information.
When you first connect the MDX-650P to a battery, it functions as a voltmeter
until you press the ENTER button.
IMPORTANT: If you connect the tester to a voltage source greater than 30 Vdc,
you may damage the tester's circuitry.
The menu-driven display will then guide you step by step through the test
process. Use the keypad buttons to scroll to and select options in the menu.
To turn off the tester when not connected to the battery, briefly press and hold
the MENU button.
www.midtronics.com
Serial
number

Display and Keypad

7
•
Serial Number Label
•
MDX-650P
Battery Conductance &
System Analyzer