Registering Your Mdx-Series Tester; Display And Keypad - Midtronics MDX-655 Instruction Manual

Registering Your MDX-Series Tester

Before using your tester, we recommend that you register it online to activate
your warranty. Registration will also make it faster and easier for you to obtain
technical support and service.
To register, log on at www.midtronics.com/warranty.html and have your serial
number ready. The number is at the bottom of the label on the back of the
tester.
Serial
number
Serial Number Label

Display and Keypad

When you first connect the tester to a battery, it functions as a voltmeter until
you press the ENTER button.
IMPORTANT: If you connect the tester to a voltage source greater than 30 Vdc,
you may damage the tester's circuitry.
The menu-driven display will then guide you step by step through the test
process. Use the keypad buttons to scroll to and select options in the menu.
To turn off the tester when not connected to the battery, briefly press and hold
the MENU button.
www.midtronics.com 7
• •