Communications gateway module. for use with electric fixed ratio (efr) systems to provide fieldbus communications
abilities. for professional use only. (34 pages)
For metered dispense of petroleum and synthetic oils. 1000 psi (7 MPa, 69 bar) Maximum Working Pressure 4 gpm (15.1 lpm) Maximum Flow Rate Model 256556 (1–16 quarts) Flex Extension Model 256786 (1–16 quarts) Rigid Extension Model 256787 (1–16 quarts) Gear Lube Extension Model 253601 (1–10 liters) Flex Extension...
D This equipment is for professional use only. D Read all instruction manuals, tags, and labels before operating the equipment. D Use the equipment only for its intended purpose. If you are not sure, call Graco Technical Assistance at 1–800–533–9655.
Operation Pressure Relief Procedure NOTE: Clean inlet screen regularly 1. Insert the nozzle into the fluid receptacle and pull the trigger. WARNING 2. Watch the meter pointer on the meter dial move, PRESSURIZED EQUIPMENT and release the trigger when the desired amount HAZARD of fluid has been dispensed.
Service Piston and 2. Insert a screwdriver into the notch of the chamber Chamber assembly and pry off the chamber top (B). See Fig Assembly 3. Remove all parts. 3. Clean the parts and blow them dry. 2 (203687 shown) 4.
With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.