Canon PowerShot S400 Digital Elph User Manual page 33

unctions 131
Information Displayed on the LCD Monitor
Shooting Mode
When a shooting setting is changed, information about the settings
displays on the LCD monitor for approximately 6 seconds even if the
LCD monitor is set to Off or to the No Display mode. (It may not display
under some circumstances, depending on the selected settings.)
You may set the flash, continuous mode, self-timer, macro,
infinity and metering mode settings while this information
is displayed.
recorded image appears on the LCD monitor for 2 to 10
seconds (1-second increments). It will continue to display if
you press the SETbutton while it is shown on the screen. See
Changing the Review Duration (p. 50).
While a recorded image is displayed on the LCD monitor,
you can check the exposure with the graph (see Histogram
Function, p. 33) that shows the distribution of the brightness
data. (Press the DISP. b utton if the histogram and other
information is not shown) If the exposure requires
adjustment, set the exposure compensation and reshoot.
I_ A slow shutter speed has likely been selected because of
insufficient lighting if the upper indicator flashes orange
after the metering preparations are complete and the camera
shake icon L_ displays in the LCD monitor. Set the flash to []
or rJl or affix the camera to a tripod to shoot.