Canon PowerShot S400 Digital Elph User Manual page 140

LAstof
Corrupted Data You attempted to replay an image with
corrupted data.
RAW You attempted to replay an image
recorded in the RAW format.
Unidentified Image You attempted to replay an image that
was recorded in a special format
(proprietary format used by the camera
of another manufacturer, etc.) or a
movie clip recorded by another camera.
Cannot magnify! You attempted to magnify an image
which was photographed with another
camera, recorded in a different format, or
edited on a computer.
Cannot rotate You attempted to rotate an image which
was photographed with another camera,
recorded in a different format, or edited
on a computer.
IncompatibleWAVE format A sound memo cannot be added to
this image since the format of the
existing sound memo is incorrect.
Cannot register this image! You attempted to add a start-up
image that was created with another
camera.
Protected! You attempted to erase a protected image.
Too many marks Too many images have been marked with
print settings, transfer settings or slide
show settings. Cannot process any more.
Unselectable image You attempted to set the print settings
for a non-JPEG file.
Exx: (xx: number) Camera malfunction. Turn
the power off and then back on, then
shoot or replay. A problem exists if the
error code reappears. Note the number
and contact your Canon Customer
Support Help Desk. If an error code
displays directly after taking a picture,
the shot may not have been recorded.
Check image in replay mode.