Table of Contents
Advertisement
MAINTENANCE
a) identify performance deviations and deterioration of security, regular maintenance
should be performed according to the maintenance program and must have records for
future audits.
b) For the customer the electrical system service personnel should review and test the
electrical conditions (safety relays, contactors, cables, contacts, passwords, etc.) once a
month.
c) For customer service personnel should check the mechanical integrity and daily fixing
mechanical protection;
d) The normal work of the team will be restored only when the responsible (s) for the
maintenance of end (in) the service. All fixed guards, perchance, have been removed must
be replaced and screwed again as they were;
e) Only authorized and trained people who recognize the risks of the machine should be
serviced.
f) Check for wear and tension (voltage) of the motor belt every 100 hours.
g) An electrician must provide electrical service as specifications laws
local and national.
h) If the power cord is damaged, it must be replaced
by the manufacturer or authorized service with a special cord
provided by the manufacturer or authorized service in order to prevent
accidents.
i) preventive maintenance with the potential to cause accidents should be directed
planning and management by a legally qualified professional.
CHANGE FELT
1- Take your team making;
2- Remove the side guards and the front engine cover;
3 - screws Take the 'A';
4 - Release the spring attached to the shaft end of 'B';
5 - Remove the screws "C" after appropriate as mentioned below:
A
C
A
C
B
D
E
C
D
A
B
Pg.10
A
Advertisement
Table of Contents
