Table of Contents
Advertisement
Link and Configure
The WTC must be linked to the target lighting controllers to create lighting
effects using scheduled Events and Scenes. Recommended steps:
• Configure TimeClock defaults, see
• Identify and Link the target controllers, see
• Determine the Groups required for the space you want to control.
• Determine each controller's preset lighting levels for the Scene.
• Define and schedule Events, see
The WTC can be Linked to a project's lighting controllers using Echoflex
pre-commissioning services. Contact customer service for information about
pre-commissioning services.
Main Menu
The Main Menu provides access to set up and configure Events, settings, and
manage linked controllers. Press [Up], [Down], or [Enter] to wake up and
navigate the Main Menu screen.
To navigate the menu options, press [Up] or [Down] to scroll and press [Enter]
to make a selection. Press [Back] to cancel without saving.
Main Menu
Schedule Events
TimeClock Settings
Holiday Shut-Off
Manage Controllers
Aug 2,
For an example of submenus and screen navigation, see
page
24.
Schedule Events
The WTC supports up to 50 programmed Events that can be scheduled to
occur and re-occur every day, on weekdays, on weekends, or on individual
days of the week.
Events can be set to occur at a particular time
of day by setting a specific time, or by setting
an offset time based on an astronomical
event, such as before sunrise, after sunrise,
before sunset, or after sunset. Events can also
be connected to create a compound Event,
where one Event triggers other Events to
execute, see
An Event is controlled by the type of Action selected. Types of Action include:
11
2021
4:20pm
Stage an Event
TimeClock Settings
Schedule an Event
page
12.
on
Wireless TimeClock Configuration Guide
on
Link or UnLink
on
page
on
Menu Structure
Main Menu
Schedule Events
TimeClock Settings
Holiday Shut-Off
Manage Controllers
Aug 2,
2021
page
16.
page
21.
12.
on
4:20pm
Advertisement
Table of Contents
