Install The Station; Attach The Faceplate - ETC ECHOFLEX Wireless TimeClock Configuration Manual

Install the Station

Receptacle spacers are provided to help align the station flush against the wall
in flush-mount applications. The spacers are not required when installing the
station into a surface-mount electrical box.
1. Insert the station and the connected wiring in the electrical box.
2. Fold spacers as needed to achieve the thickness required to fill the gap
between the station, wall surface, and the electrical box.
3. Secure the station in place using the four screws provided. If using
spacers, insert the screws through the spacers.
4. Use a level to align the station square to the wall. Adjust spacers as
required so the faceplate fits flush against the wall.
5. Shape the internal whip antenna into a "J" or hockey stick with the tip
pointing up an away from the metal mounting bracket. Ensure the tip of
the antenna is not touching any metal.

Attach the Faceplate

The faceplate is secured to the
station with two magnets at the
bottom.
1. Hook the top of the faceplate
into the tabs at the top of
station's metal plate.
2. Ensure the whip antenna is not
pinched and the tip is not
touching any metal.
3. Close the bottom of the
faceplate to engage the
magnets and secure it in place.
Wireless TimeClock Configuration Guide
Faceplate hooks
Spacers
Spacers
Magnet contacts
6