Table of Contents
Advertisement
Blink Controller
There may be many controllers in the configured space, each with a different
role. Use the Blink Controller feature to confirm which lighting fixture the
selected controller or channel controls.
1. Select Blink Controller from the Config Controller menu, and press
[Enter]. The target lighting fixture starts to blink.
2. Press [Enter] to toggle between Blink Controller and Stop Blink.
Test Connection
The installation location of the WTC and elements in the space determine the
transmitted signal strength to a controller. Use Test Connection to evaluate
the connection.
1. Select Test Connection from the Config Controller menu.
2. Press [Enter] to request a signal. The evaluation displays briefly on the
screen.
• Best: -41 to -70 dBm
• Good: -70 to -80 dBm
• Not ideal: -80 to -95 dBm
Note:
Hold
The Hold feature suspends all scheduled Events and allows manual lighting
control to persist. Press [Hold] to cycle through the two Hold types: Timed Hold
and Indefinite Hold described below. Hold applies to all Groups.
The Holiday Shut-Off feature is an additional type of Hold that is configured
from the main menu. Groups can be included or excluded from Holiday
Shut-Off. For more information, see
Lighting TimeClock
Mon, Aug 2, 2021
4:20pm
v1.0.0
No Holds are
active
Wireless TimeClock Configuration Guide
For multi-channel controllers, only the radio ID for the
first channel can provide a signal strength evaluation.
Timed Hold
All Events for all
Groups on Hold for
x hrs
xx mins
press
HOLD
Press Hold twice to
cancel and
reinstate schedule.
Timed Hold
is active
Holiday Shut-Off
Indefinite Hold
All Events for all
Groups on Hold
press
HOLD
Press Hold to
cancel and
reinstate schedule.
Indefinite
Hold is active
page
20.
on
Lighting TimeClock
Mon, Aug 2, 2021
4:20pm
press
HOLD
v1.0.0
No Holds are
active
22
Advertisement
Table of Contents
