Advertisement
Step by step assembly instructions
Step One
Attach metal bar (3) to legs (2) on both side of the bar using 6 x washers (A) and bolts
(B) by allen key (D) as supplied.
We would advise that at this stage the top remains inside the original packaging to
avoid scratching the top.
___________________________________________________________
Step Two
Attach assembly from step one to top frame (4) using 8 x washers (A) and bolts (B) by
allen key (D) as supplied.
___________________________________________________________
Step Three
Carefully place table top (1) upside down on a clean carpet or blanket to avoid
damage to the surface.
Advertisement
