PREMIUM STRINGER 9200 User Manual page 9

9. Tension Setting :
A).
KNOT
B).
MAIN
C).
KNOT
KNOT Tension Setting
Press "KNOT" key and machine will increase pulling tension
by 10% over the selected MAIN or CROSS tension for one
pull. For example: Set 60.0 pounds at MAIN tension..
1). Press "KNOT" key and screen will display "KNOT 66.0
lbs" for one pull.
2). After one pull, screen will turn back to "MAIN 60.0 lbs".
MAIN Tension Setting
Press "MAIN" key and "Main" word will displayed on screen.
Set the desired main tension by +1.0, -1.0, +0.1, -0.1 keys.
For example: Set the mains to 50.0 pounds.
1). Press "MAIN" key to setup the main tension.
2). Hold the "+/-1.0 or +/-0.1" key down until the desired
tension 50.0 - pound is shown up on the screen.
3). Press "M" key to store this 50.0-pound tension setting
as main tension or wait for 3 seconds to let the machine
automatically store this 60.0-pound tension setting as
main tension. There will be one beep sound indicating
the automatic memory.
CROSS Tension
Press "CROSS" key and "Cross" word will displayed on
screen. Set the desired cross tension by +1.0, -1.0, +0.1, -0.1
keys. For example: Set the cross to 56.0 pounds.
1). Press "CROSS" key to setup the cross tension
2). Hold the "+/-1.0 or +/-0.1" key down until the desired
tension 56.0 - pound is shown up on the screen.
3). Press "M" key to store this 56.0-pound tension setting
as cross tension or wait for 3 seconds to let the machine
automatically store this 56.0-pound tension setting as
cross tension. There will be one beep sound indicating
the automatic memory.
9