Advertisement
POWERING
To install the power cord, insert the female end of the power cord into the Power Cord
Socket located on the side panel and plug the male end into a grounded power outlet.
The main power switch is located on the right of the machine next to the receptacle
for the power cord. A 2 amp fuse is located in the power cord receptacle.
Voltage between 220V and 230V (50 Hz to 60 Hz) is acceptable.
A grounded outlet must be used.
6
Advertisement
Need help?
Do you have a question about the 9200 and is the answer not in the manual?
Questions and answers