Table of Contents
Advertisement
2. Press keys
and
one cooking zone is active, one flashing
dot will light up to indicate that the zone
is being timed.
3. Select the automatic switch-off time using
the
and
down to set the time more quickly), or
select an additional zone using keys
and
.
If the timer is activated without an
active cooking zone it behaves like
an ordinary minute minder.
4. Press keys
and
until a lighted dot appears under the
display of the zone whose set time you
wish to change. Once the relevant zone
is selected, use keys
change the previously selected time.
5. At the end of the previously set time, the
hob will deactivate the cooking zone
and warn the user with a series of
buzzers. Press any key to stop the
buzzer.
Power control
The hob is fitted with a power control
module that optimises/limits consumption. If
the overall set power levels exceed the
maximum limits permitted, the electronic
circuit board controls automatically the
power supplied by the hot plates.
The module tries to maintain the maximum
deliverable power levels. Levels set by the
automatic control will appear on the
display.
again; if at least
keys (hold the keys
at the same time
and
to
Use
The flashing of a power level indicates that
it will be automatically limited to a new level
selected by the power control module.
Power control priority is given by
the first zone set.
The power control module does
not affect the total power
consumption of the appliance.
Control lock
After activating the hob:
1. Press keys
time.
2. Press the
The controls are now locked and
appear on the display.
In case of a power failure the
control lock will be deactivated.
To unlock the controls:
1. Press keys
time.
2. Press the
and
at the same
button after the beep.
and
at the same
button after the beep.
will
71
Advertisement
Table of Contents
