Table of Contents
Advertisement
Cleaning the roof of the oven (not on
pyrolytic models)
High temperature inside the oven
during use
Danger of burns
• The following operations must be
performed only with the oven switched
off and completely cool.
The appliance is equipped with a tilting grill
element that allows for easy cleaning of the
upper part of the oven cavity.
1. Free the upper heating element by gently
lifting it and rotating its retaining latch by
90 degrees.
2. Gently lower the heating element until it
stops.
Improper use
Risk of damage to the appliance
• Do not excessively flex the element
during cleaning.
3. When you have finished cleaning, place
the heating element back in position and
turn the retaining latch to lock it in place.
Cleaning and maintenance
Cleaning the bottom of the oven (on
some models only)
1. Remove in sequence the pizza stone
cover (1) and the base (2) on which it is
placed. The base has to be lifted a few
millimetres, then pulled outwards.
2. Lift the end of the bottom heating
element (3) a few centimetres and clean
the oven base.
3. Put the pizza stone base back in place,
pushing it in until it hits the back of the
oven, and push it down so that the
heating element plate is embedded into
the base itself.
41
Advertisement
Table of Contents
