CHAPTER 3. REPAIR INSTRUCTION
1.3 Flexible Connectors
This product uses the four types of the flexible connectors.
1 Type A
2 Type B
3 Type C
UNLOCK
4 Type D
UNLOCK
CAUTIONS:
1. For the connectors of Type C and Type D, set them to the unlocked
state before removing and inserting flexible card. After flexible card
is inserted, set them to the locked state.
2. The flexible card is equipped with the holes as shown. Use them for
removal and insertion by inserting the tweezers into them as required.
Unconnected state
Unconnected state
The contact-piece
should face
downwards
Unlocked state
The contact-piece
should face
upwards
Unlocked state
Fig. 3-2 Flexible connectors
Connected state
Connected state
LOCK
Locked state
LOCK
Locked state
Fig. 3-3 Holes for removal
3-2
Holes