CHAPTER 3. REPAIR INSTRUCTION
DC2.5V
(1)-1
(1)-2
FINDER UNIT
(1)-3
FINDER RUBBER
o
(1)-2
2.12 Assembling the FINDER UNIT
(1) Assembling the FINDER UNIT
1. Apply the voltage (DC 2.5V) across the motor terminal to drive the motor until the motor stops and the
BARREL fully comes out.
2. Move the SLIDER fully to the top of the BARREL and secure it with the screw of o.
3. Assembling the FINDER RUBBER to FINDER UNIT.
4. Apply the voltage (DC 2.5V) across the motor terminal to drive the motor until the motor stops and the
BARREL is full housed.
BARREL
(1)-1
The SLIDER must have been moved
fully to the top of the BARREL.
Fig. 3-14 Assembling the FINDER UNIT
(1)-2
SLIDER
(1)-4
DC2.5V
(1)-4
3-14
o
XA4-9140-357
3.5mm
METAL
M1.4
(SELF TAP)
BARREL
FINDER UNIT