CHAPTER 3. REPAIR INSTRUCTION
1.4 Flexible Connectors
This product uses the two types of the flexible connectors.
1
Type A
UNLOCK
UNLOCK
2
Type B
The contact-piece should
face front.
CAUTIONS:
1. For the connectors of Type A, set them to the unlocked state before
removing and inserting flexible card. After flexible card is inserted,
set them to the locked state.
2. The flexible card is equipped with the holes as shown. Use them for
removal and insertion by inserting the tweezers into them as required.
The contact-piece should
face upwards.
Unconnected state
Fig. 3-2 Flexible connectors
3-2
LOCK
LOCK
connected state
Holes of the flexible card.
Fig. 3-3 Holes for removal