Functions Available In Each Shooting Mode - Canon PowerShot S230 Service Manual

Functions Available in Each Shooting Mode

AF frame: 9points (AiAF)
Focus AF frame: 1point (center)
AF lock
Spot AE point
Exposure control
Exposure
ISO speed (AUTO)
control
ISO speed (50/100/200/400)
AE lock
White balance
Shutter Tv value setting
Red-eye reduction ON
Autoflash
Slow -sync.
Flash
On
Off
AF assist beam
Single shot
Continuous
Self-timer (10/2 sec.)
Normal shooting
Shooting
specifi- Macro shooting
cations
Infinity shooting
Digital zoom
Photo effect
Vertical and horizontal conversion
Reco Sti
Recording pixels
rding ll
(L/M1/M2/S)
Compression (SF/F/N)
spec
ificat Mo Recording pixels
ions vie (
VGA/QVGA/QQVGA)
Functions that are available or unavailable in all modes are not described in the upper table.
: Default (set by mode change)
Valies saved even PLAY
: Values saved even after shutdown are remembered.
*1 Evaluation metering is the default.
*2 ISO 50 is the default.
*3 Only the red-eye reduction and auto are saved in auto mode. (Then shutdown with the flash off,
system starts up with the previous flash mode which was selected red-eye reduction or auto.)
*4 The setting of vertical and horizontal conversion is effective.
*5 Large is the default.
*6 Fine is the default.
*7 QVGA is the default.
Auto
Auto only
*3
*3
*3
: selectable
REC are remembered.
1-30
Manual
Manual
(long shutter)
*2 *2
: selectable only for the first image
Stitch Assist Movie