Advertisement
13
Shipping
stabilizers
Remove shipping stabilizers from motor
assembly.
Install the blade assembly to motor using
the preinstalled screws. Tighten screws
securely. Repeat this process for
remaining blade assemblies.
© 2017 Monte Carlo Fan Company
14
Pull chain
Install pull chain to preassembled pull
chain on fan. Pull chains provided.
5
15
Reverse switch
Setting the reverse switch in the down
position will result in downward airflow
and setting the switch in the up position
will result in upward airflow.
Note: Reverse switch must be set either
way completely. If the reverse switch is
set in the middle position, fan will not
operate.
09/2017
Advertisement
