Fenix TK22UE Operating Instructions

FENIX Tactical Flashlights
Operating Instructions – FENIX TK22 UE Tactical Flashlight

Switches

The tail switch of the TK22 is the tactical switch and the side switch is the functional switch.

ON/OFF

Tap: Slightly tap the tactical switch to momentarily turn on the light, release it to turn the tactical light off.
Fully press: Fully press the tactical switch to fully turn on and lock the light, press once again to unlock and turn off the
light.

Output Selection

With the light switched on, single-click the functional switch to cycle through Turbo→Low→Med→High.

Strobe

With the light switched on, press and hold the functional switch for 1 second to enter strobe, The light will flash at a
frequency of 6Hz and 15hz every 2 seconds. Click once again to return back to General mode.

Intelligent Memory Circuit

The TK22 flashlight will memorize the last selected output (excluding strobe.) When turned on again the previously used
output will be recalled.

Overheat Protection

The light will accumulate a lot of heat when used on Turbo for extended periods. To reduce the temperature, the light
will automatically downshift to High when it has been used on Turbo for 15 minutes. When the temperature is reduced,
Turbo mode can be reselected.