Naming Preset Stations - Sony DAV-X10 Operating Instructions Manual

The ultimate designer home cinema system - outstanding digital audio and video performance from just 2 front speakers.
Hide thumbs Also See for DAV-X10:
Table of Contents

Advertisement

If an FM program is noisy
If an FM program is noisy, you can select
monaural reception. There will be no stereo
effect, but reception will improve.
1
Press TUNER MENU.
2
Press X/x repeatedly until "FM Mode?"
appears in the front panel display, then
press
or c.
3
Press X/x to select "MONO."
The default setting is underlined.
• "STEREO": stereo reception.
• "MONO": monaural reception.
4
Press
.
The setting is made.
5
Press TUNER MENU.

Naming preset stations

You can enter a name for preset stations. These
names (for example, "XYZ") appear in the
system's front panel display when a station is
selected.
Note that no more than one name can be entered
for each preset station.
Note
• You cannot enter a name for preset stations of the
Radio Data System (RDS) (page 70).
1
Press FUNCTION repeatedly until "FM"
or "AM" appears in the front panel
display.
The last received station is tuned in.
2
Press PRESET + or – repeatedly to
select the preset station you want to
create an index name for.
3
Press TUNER MENU.
4
Press X/x repeatedly until "Name In?"
appears in the front panel display.
TUNED
STEREO
5
Press
.
6
Create a name by using the cursor
buttons.
Press X/x to select a character, then press c
to move the cursor to the next position.
Letters, numbers, and other symbols can be
input for a radio station name.
If you make a mistake
Press C/c repeatedly until the character to
be changed flashes, then press X/x to select
the desired character.
To erase the character, press C/c
repeatedly until the character to be erased
flashes, then press CLEAR.
7
Press
.
"Complete!" appears in the front panel
display, and the station name is stored.
8
Press TUNER MENU.
Tip
• You can check the frequency by pressing DISPLAY
repeatedly (page 69).
Viewing the station name or
frequency in the front panel
display
When the system is set to "FM" or "AM," you
can check the frequency using the front panel
display.
Press DISPLAY.
Each time you press DISPLAY, the display
changes as shown.
1 Station name*
2 Frequency**
* This is displayed if you have entered a name for a
preset station.
** Returns to the original display when several seconds
have elapsed.
69
GB

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hcd-x10

Table of Contents