Calibration Mic - Sony DAV-X10 Operating Instructions Manual

11
Press .
The [AUTO CALIBRATION] display
appears.
AUTO CALIBRATION
Connect calibration mic. Start
measurement?
YES
NO
12
Connect the calibration mic to the
A.CAL MIC jack on the rear panel, and
set it up at the ear level using a tripod,
etc. (not supplied).
The front of each speaker should face the
calibration mic, and there should be no
obstruction between the speakers and the

calibration mic.

DIGITAL IN
OPTICAL OPTICAL COAXIAL
SAT/
TV
CABLE
IMPEDANCE USE 4
SPEAKER
DMPORT (DVD ONLY)
1 2 OUT
ANTENNA
COMPONENT VIDEO OUT A.CAL
(DVD
AM
P / P / ONLY)
Y B R MIC
C C EURO AV OUTPUT(TO TV)
B R
ECM-AC2
FM
R AUDIO L VIDEO
75 COAXIAL
SAT/CABLE IN
A.CAL
MIC
ECM-AC2
Calibration mic
13
Press X/x to select [YES], then press
.
[AUTO CALIBRATION] starts. Be quiet
during the measurement.
Note
• Loud test sound is output when [AUTO
CALIBRATION] starts. You cannot turn the
volume down. Give consideration to children
and neighbors.
• Avoid being in the measurement area and
making noise during the measurement (which
takes about 1 minute), as it may interfere with
measurement.
14
Unplug the calibration mic and press C/
c to select [YES].
Quick Setup is finished. All connections
and setup operations are complete.
Measurement complete.
FRONT L :
FRONT R :
SUBWOOFER :
If OK, unplug calibration mic and select
"YES".
YES
Note
• The environment of the room in which the
system is installed may affect measurements.
• If measurement fails, follow the message then
retry [AUTO CALIBRATION].
To quit the Quick Setup
Press DISPLAY in any Step.
Tip
• If you change the position of the speakers, reset the
speaker settings. See "Calibrating the Appropriate
Settings Automatically" (page 79).
• If you want to change any of the settings, see "Using
the Setup Display" (page 82).
• If there is no sound from the speakers, check the
speaker connection.
To recall the Quick Setup display
1
Press DISPLAY when the system is in
stop mode.
The Control Menu display appears.
2
Press X/x to select
press .
The options for [SETUP] appear.
3.12m 0.0dB
3.35m + 0.5dB
3.35m + 1.0dB
NO
[SETUP], then
continued
19
GB