Calibrating The Appropriate Settings Automatically; (Auto Calibration) - Sony DAV-X10 Operating Instructions Manual

Changing the password
1
Press DISPLAY while the system is
in stop mode.
The Control Menu display appears.
2
Press X/x to select
[PARENTAL CONTROL], then press
.
The options for [PARENTAL CONTROL]
appear.
3
Press X/x to select [PASSWORD t],
then press .
The display for entering the password
appears.
4
Enter your 4-digit password using the
number buttons, then press
5
Enter a new 4-digit password using the
number buttons, then press
6
To confirm your password, re-enter it
using the number buttons, then press
.
If you make a mistake entering
your password
Press C before you press
correct number.
.
.
and input the
Calibrating the
Appropriate Settings
Automatically

(AUTO CALIBRATION)

D. C. A. C.* can set the appropriate surround
sound automatically.
* Digital Cinema Auto Calibration
Note
• Loud test sound is output when [AUTO
CALIBRATION] starts. You cannot turn the volume
down. Give consideration to children and neighbor.
• The A.CAL MIC jack is for the supplied calibration
mic only. Do not connect other mics as it may cause
damage to the system.
1
Connect the calibration mic to the
A.CAL MIC jack on the rear panel, and
set it up at the ear level using a tripod,
etc. (not supplied).
The front of each speaker should face the
calibration mic, and there should be no
obstruction between the speakers and the
calibration mic.
continued
79
GB