Sony DAV-X10 Operating Instructions Manual page 81

x The measurement is OK.
Unplug the calibration mic, then select
[YES]. The result is implemented.
Measurement complete.
FRONT L :
FRONT R :
SUBWOOFER :
If OK, unplug calibration mic and select
"YES".
YES
x The measurement is not OK.
Follow the message, then select [YES] to
retry.
Measurement failure.
Check front speaker connection.
Retry?
YES
NO
Note
• While the Auto Calibration function works:
– do not turn off the power.
– do not press any button.
– do not change the volume.
– do not change the function.
– do not load or eject a disc.
– do not unplug the calibration mic.
• Depending on the acoustics of the room, the
displayed distance may not represent the actual
distance.
To select the auto calibration
setting mode
You can select the auto calibration setting mode.
1
Press SYSTEM MENU.
2
Press X/x repeatedly until "A.CAL MODE"
appears in the front panel display, then
or c.
press
3.12m 0.0dB
3.35m + 0.5dB
3.35m + 1.0dB
NO
3
Press X/x to select a setting.
The default setting is underlined.
• "A.CAL ON": reflects the setting that is set by the
auto calibration.
• "A.CAL OFF": returns to the default speaker
setting, regardless of the speaker setting made by
the auto calibration function.
4
Press .
5
Press SYSTEM MENU.
The system menu turns off.
Note
• If "Setup A.CAL" appears in the front panel display,
perform [AUTO CALIBRATION]. For details, see
page 79.
• When you perform [AUTO CALIBRATION],
"A.CAL MODE" is set to "A.CAL ON"
automatically.
To adjust the subwoofer level
1
Press SYSTEM MENU.
2
Press X/x repeatedly until "SW LEVEL"
appears in the front panel display, then
press or c.
3
Press X/x to adjust.
Adjusts the subwoofer level (–6.0 dB – +6.0 dB, 0.5
dB increments).
The adjusted value appears in the front panel
display.
4
Press .
5
Press SYSTEM MENU.
The system menu turns off.
Note
• When you perform [AUTO CALIBRATION], the
subwoofer level setting is readjusted.
81
GB