Sony DAV-X10 Operating Instructions Manual page 93

The subtitles cannot be turned off.
• The DVD prohibits turning off subtitles.
The angles cannot be changed.
• Multi-angles are not recorded on the DVD being
played (page 57).
• The DVD prohibits changing the angles.
A disc cannot be ejected and "LOCKED"
appears in the front panel display.
• Contact your Sony dealer or local authorized Sony
service facility.
[Data error] appears on the TV screen when
playing a DATA CD or DATA DVD.
• The MP3 audio track/JPEG image file/DivX
video file you want to play is broken.
• Data is not MPEG1 Audio Layer 3 data.
• JPEG image file format does not conform to DCF.
• A JPEG image file has the extension ".JPG" or
".JPEG," but is not in JPEG format.
• The file you want to play has the extension ".AVI"
or ".DIVX" but is not in DivX format, or is in
DivX format but does not conform to a DivX
Certified profiles.
The system does not work normally.
• Disconnect the AC power cord (mains lead) from
the wall outlet (mains), then reconnect after
several minutes.
"DEMO PLAY" appears in the front panel
display.
• Contact your Sony dealer or local authorized Sony
service facility.
The HDMI CONTROL function does not work.
• When "HDMI" does not light up in the front panel
display, check the HDMI connection (page 21).
• Set the [HDMI CONTROL] setting in [CUSTOM
SETUP] to [ON] (page 37, 86).
• Make sure that the connected component is
compatible with the HDMI CONTROL function.
• Check that the AC power cord (mains lead) of the
connected component is connected securely.
• Check the connected component's setting for the
HDMI CONTROL function. See the operating
instructions of the component.
• If you change the HDMI connection, connect and
disconnect the AC power cord (mains lead), or
have a power failure, set the [HDMI CONTROL]
setting in [CUSTOM SETUP] to [OFF], then set
the [HDMI CONTROL] setting in [CUSTOM
SETUP] to [ON] (page 37, 86).
• For details on the HDMI CONTROL function, see
"Preparing for the HDMI CONTROL function"
(page 37).
No sound is output from the system and TV
while using the System Audio Control
function.
• Set the [AUDIO (HDMI)] setting in [CUSTOM
SETUP] to [AUTO] or [PCM] (page 86).
• Make sure that the connected TV is compatible
with the System Audio Control function.
• For details on the System Audio Control function,
see "Enjoying the TV sound from the speakers in
this system" (page 40).
93
GB