Settings For The Display; Screen Setup - Sony DAV-X10 Operating Instructions Manual

Settings for the Display

[SCREEN SETUP]

Choose settings according to the TV to be
connected.
Select [SCREEN SETUP] in the Setup Display.
To use the display, see "Using the Setup
Display" (page 82).
The default settings are underlined.
x [TV TYPE]
Selects the aspect ratio of the connected TV (4:3
standard or wide).
[16:9]
[4:3 LETTER
BOX]
[4:3 PAN SCAN]
[16:9]
[4:3 LETTER BOX]
[4:3 PAN SCAN]
84
GB
SCREEN SETUP
TV TYPE:
HDMI RESOLUTION:
YC C /RGB (HDMI):
B R
SCREEN SAVER:
JACKET PICTURE
BACKGROUND:
LINE:
4:3 OUTPUT:
Select this when you connect a
wide-screen TV or a TV with a
wide mode function.
Select this when you connect a 4:3
screen TV. Displays a wide picture
with bands on the upper and lower
portions of the screen.
Select this when you connect a 4:3
screen TV. Automatically displays
the wide picture on the entire
screen and cuts off the portions
that do not fit.
Note
• Depending on the DVD, [4:3 LETTER BOX] may be
selected automatically instead of [4:3 PAN SCAN] or
vice versa.
x [HDMI RESOLUTION]
Selects the type of video signals output from the
HDMI OUT (high-definition multimedia
interface out) jack. When you select [AUTO]
(default), the system outputs video signals of the
highest resolution acceptable for your TV.
If the picture is not clear, natural or to your
satisfaction, try another option that suits the disc
and your TV/projector, etc. For details, refer
16:9
also to the instruction manual supplied with the
AUTO
YC C
TV/projector, etc.
B R
ON
VIDEO
[AUTO]
FULL
[1920 ×
×
[1280
[720 × 480/
576p*]
* i: interlace, p: progressive
Note
• Even when a setting other than [AUTO] is selected
and the connected TV cannot accept the resolution,
the system automatically adjusts the video signals
that are suitable for the TV.
• When the HDMI indicator on the front panel lights
up, images other than [720 × 480p] or [720 × 576p]
are stretched vertically.
x [YC
B
Selects the type of HDMI signal output from
HDMI OUT jack.
[YC C
B R
[RGB]
Note
• If the playback picture becomes distorted, set
[YC C
B R
• If the HDMI OUT jack is connected to equipment
with a DVI jack, [RGB] signals will be automatically
output even when you select [YC
x [SCREEN SAVER]
The screen saver image appears when you leave
the system in pause or stop mode for 15 minutes,
or when you play back a Super Audio CD, CD,
DATA CD (MP3 audio), or DATA DVD for more
Normally, select this.
1080i*]
Sends 1920 × 1080i video signals.
720p*] Sends 1280 × 720p video signals.
×
Sends 720 480p or 720
video signals.
C /RGB (HDMI)]
R
]
Outputs YC C
B
Outputs RGB signals.
] to [RGB].
×
576p
signals.
R
C ].
B R