Advertisement
Quick Links
INSTALLATION
1
Characteristics :
The IRS 300 is compatible with the IRT 103 & IRT 803
infrared transmitters.
The IRS 300 is initially
configured to operate with
the IRT103 transmitter or
the IRT 803 without a
channel selected.
OPTIONS -
IRT 103 individual control function.
IRT 803 multi-channel remote control with individual
or master control functions (one to eight blinds).
WARNING! : The IRT 803 is the sole programming
tool for the IRS 300.
Impulse switch connection for use without remote
control (individual or master control).
IRS 300 INFRARED RECEIVER
General description :
The IRS 300 is an infra-red remote control system.
It is a control system designed for controlling all types of
interior blinds (exept for curtains and vertical blinds),
powered by 24Vdc motors from the LT28 or the Concept 25
line.
It is capable of controlling eight different blinds individually or
as a group and has many sophisticated functions.
IRT 803
1
2
3
4
5
6
7
8
1 ➟ 8
1 ➟ 4
5 ➟ 8
PROG.
®
®
guide
Technical data :
Nominal supply : 24 Vdc
Minimum supply : 20 Vdc
Maximum supply : 35 Vdc
IP rating : IP00
Working temperature : 0°C to 50°C
Output relay : 3A
Housing colour/material : White/ABS
Net weight : 65g
Dimensions : 76 x 50 x 32mm
In compliance with the
R
requirement.
Advertisement
Related Manuals for SOMFY IRS 300
Summary of Contents for SOMFY IRS 300
- Page 1 It is capable of controlling eight different blinds individually or as a group and has many sophisticated functions. Characteristics : The IRS 300 is compatible with the IRT 103 & IRT 803 Technical data : infrared transmitters. Nominal supply : 24 Vdc...
- Page 2 2. Place the screw supplied into the securing hole on the face of the IRS 300 and feed into the raw plug. SCREW 3. Fix the IRS 300 unit by securing the screw. RAW PLUG Wiring : D C Motors...
- Page 3 Programming : Warning : If you use the IRT803, it is necessary to « lock » the receivers which are not being programmed by operating them in either UP or DOWN direction (they will be locked for 3 minutes and it is impossible to enter in the programming mode by the IRT803).
- Page 4 Manfunctions : 1- Check the battery level of the transmitter. 2- Check the low voltage feed of the IRS 300 (inversion between the + and -). The Blind won’t move 3- Check if there is a bright light shining on the receiver.
Need help?
Do you have a question about the IRS 300 and is the answer not in the manual?
Questions and answers