Connecting The Tv - Sony DAR-X1R Operating Instructions Manual

5 Connecting the TV

Connect the TV and recorder using a SCART cord (not supplied) to the LINE 1 – TV jack and your TV.
Be sure of a firm connection to avoid hum and noise.
See the operating instructions supplied with the TV to be connected.
When you set "Easy Setup - Line1 Output" to "S Video" or "RGB" (page 27), use a SCART cord that
conforms to the selected signal.
: Signal flow
b
Notes
• When you connect the recorder to your TV via the
SCART jacks, the TV's input source is set to the
recorder automatically when you start playback. If
necessary, press TV/DVD to return the input to the TV.
• For correct SMARTLINK connection, you will need a
SCART cord that has the full 21 pins. Refer to your
TV's instruction manual as well for this connection.
• If you connect this recorder to a TV with SMARTLINK,
set "Easy Setup - Line1 Output" to "Video."
SCART cord (not supplied)
to LINE 1 – TV
TV
DVD recorder
About the SMARTLINK features (for SCART
connections only)
If the connected TV (or other connected
equipment such as a set top box) complies with
SMARTLINK, NexTView Link
*1
MEGALOGIC , EASYLINK
*2
CINEMALINK , Q-Link
*4 *5
LINK , or T-V LINK
following SMARTLINK features.
• Preset Download
You can download the tuner preset data from
your TV to this recorder, and tune the recorder
according to that data in "Easy Setup." This
greatly simplifies the "Easy Setup" procedure.
Be careful not to disconnect the cables or exit the
"Easy Setup" function during this procedure
(page 27).
• TV Direct Rec
You can easily record what you are watching on
your TV (page 44).
• One Touch Play
You can turn on the recorder and TV, set the
TV's input to the recorder, and start playback
with one touch of the H (play) button
(page 77).
*3
,
*2
,
*3
, EURO VIEW
, you can enjoy the
,continued
GB
21