Timer Recording (Guide Plus+/Showview/Manual); One Button Recording (Guide Plus+) (Available Only In Areas With Guide Plus+ Service) - Sony DAR-X1R Operating Instructions Manual

Dvd recorder home theatre system
Table of Contents

Advertisement

Available languages

Available languages

Timer Recording (GUIDE
Plus+/ShowView/Manual)
HDD
+
RW
- RW
- R
Video
There are three methods to set the timer: One
Button Recording (available only in areas with
GUIDE Plus+ service), ShowView, and setting
the timer manually.
b
Notes
• (Areas with GUIDE Plus+ service only)
When the recorder is connected to a set top box
receiver and you want to record using the GUIDE
Plus+ system, turn on the set top box receiver and
connect the set top box controller.
• Do not operate your set top box receiver just before or
during a timer recording. This may prevent the accurate
recording of a programme.
One Button Recording (GUIDE
Plus+) (available only in areas with
GUIDE Plus+ service)
You can use the GUIDE Plus+ system to set the
timer to record a programme up to seven days in
advance.
x REC STOP
GB
66
- RW
+
R
- R
VR
Video
Colour
buttons
TV GUIDE
</M/m/,
1
Press TV GUIDE.
VR
2
Select a programme using </M/m/,.
To search for a programme by category or by
keyword, select "Search" in the Menu Bar.
See "Searching for a Programme using the
GUIDE Plus+ System" on page 59 for more
information about searching for a programme.
You can select a programme from "My TV."
3
Press the red button ("Record").
The TIMER REC indicator lights up on the
front panel.
The set programme and Time Slot change
colour and the recorder is ready to start
recording. When recording from a set top box
receiver, be sure to turn it on.
Unlike a VCR, there is no need to turn off the
recorder before the timer recording starts.
• To record on a DVD
See "Checking/Changing/Cancelling Timer
Settings" on page 71.
• To make more detailed timer settings
See "Checking/Changing/Cancelling Timer
Settings" on page 71.
To confirm, change, or cancel a timer
recording
See "Checking/Changing/Cancelling Timer
Settings" on page 71.
To stop recording during timer recording
Press x REC STOP located beneath the remote
control cover.
Note that it may take a few seconds for the
recorder to stop recording, and that the recording
cannot be stopped within the first minute of
recording.
To adjust the recording quality
See step 3 of "Adjusting the recording picture
quality and size" on page 69.

Advertisement

Table of Contents
loading

Table of Contents