Table of Contents
Advertisement
6.3.1 Email Schedule
Configure the Email Schedule to configure when an Email notification is sent.
The color codes on email schedule have the following meanings:
Green: Slot for Motion detection event.
•
Yellow: Slot for IO alarm.
•
Red: Slot for Exception (HDD full, HDD error, or Video Loss) alarm.
•
Purple: Slot for PIR event.
•
To configure this GUI:
1. Open the Channel drop down list at the top of the menu and select the channel you want to configure.
2. Click on one of the notification modes listed to the right of the matrix (Motion, Exception or PIR).
3. Drag the mouse linearly or diagonally across an area of the matrix where you want to enable that notification mode. To disable
the notification on the schedule, select the mode you enabled, and then drag the mouse across the area you want to disable.
4. Select a different mode, and repeat the method in step 3 above. Notification modes CAN overlap.
5. When finished setting up the schedule, click Apply to activate it. You can also click Copy to use the same schedule for other
camera channels.
6. Repeat steps 1 through 5 above for each camera in the system from which capture files are saved.
NVR4, NVR8, NVR16, NVR32 Firmware User Manual
SECTION 6: NETWORK CONFIGURATION
49
Advertisement
Table of Contents
