Initial Setup; Activation - Observint NVR4 Firmware User Manual

SECTION 2: INITIAL SETUP
SECTION 2

Initial Setup

When the NVR is first powered on, it must be activated. Activation sets the admin user password and a Lock Pattern if used.
After Activation, you can use the Wizard to setup the basic configuration of the system, including network parameters, time,
cameras, etc.

2.1 Activation

When the NVR powers on, a "SYSTEM INITIALIZING" splash screen normally appears within 3 minutes. If it is the first time
powering on the recorder, an activation screen will open. You must use this menu to setup an admin password for the system, and
an Unlock Pattern, if preferred, for quickly accessing the configuration menus if the recorder.
1. In the screen shown above, enter your admin password in the New Admin Password and Confirm Password fields (see
below). Ensure that the Password Strength of your password is at least Medium (preferably Strong).
NOTE
If you forget your password, you will be unable to login the system, please contact your vendor to reset the password.
6 www.Observint.com