2. If you want to use an Unlock Pattern to access the configuration menus, open the Unlock Enable drop down list, and then
click Enable. Click Apply to continue.
3. Click the Draw button to open the Set Unlock Pattern window.
4. In the Set Unlock Pattern window, drag the mouse cursor across a pattern of circles, then release the mouse.
5. Repeat the pattern you entered, and then click Apply to save the configuration. The configuration Wizard initial screen will
open.
NVR4, NVR8, NVR16, NVR32 Firmware User Manual
SECTION 2: INITIAL SETUP
7
Need help?
Do you have a question about the NVR4 and is the answer not in the manual?
Questions and answers