Table of Contents
Advertisement
1. To use DDNS with your recorder, select the preferred options in the screen shown above:
DDNS: Check the select box to enable DDNS.
—
Server: Open the Server drop down list to select the preferred DDNS server (DDNS_3322, DYNDNS, NO_IP, CHANGEIP, or
—
DNSEXIT).
Domain: Enter the domain name you created on the DDNS service provider's web page. This will be the address you
—
enter in the URL box when you want to connect remotely to the recorder via PC. Fox example: NVR.no-ip.org.
User/Password: Enter the user name and password you obtained when creating an account on the DDNS service
—
provider's web page.
2. After all parameters are entered, click Test DDNS to test the DDNS settings. If the test result is "Network is unreachable or DNS
is incorrect", please verify that the network is functioning properly, and the DDNS information is correct or not.
3. Click Apply to save your settings. Right click the mouse to return to the Main menu.
NVR4, NVR8, NVR16, NVR32 Firmware User Manual
SECTION 6: NETWORK CONFIGURATION
47
Advertisement
Table of Contents
