Observint NVR4 Firmware User Manual page 44

SECTION 4: RECORD
To configure a recording schedule for a camera channel:
1. Open the Channel drop down list at the top of the menu and select the camera channel you want to configure.
2. Click on one of the recording modes listed to the right of the matrix (Normal, Motion, IO or PIR).
3. Drag the mouse linearly or diagonally across an area of the matrix where you want to enable that recording mode. To disable a
recording mode on the schedule, select the mode you enabled, and then drag the mouse across the area you want to disable.
4. Select a different mode, and repeat the method in step 3 above.
5. When finished setting up the schedule, click Apply to activate it. You can also click Copy to use the same schedule for other
camera channels.
38 www.Observint.com