Summary of Contents for Monte Carlo Fan Company 3SY52 D Series
Page 1
Owner’s Guide and Installation Manual 3SY52XXXD Series Fan CUL Model NO. : 3SY52XXXD Attach sales receipt to this card and retain as your proof of purchase DATE OF PURCHASE: RETAILER NAME: RETAILER ADDRESS: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 8.2 kg 18.04 lbs Total fan weight with light...
Cautions and Warnings WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING READ AND SAVE THESE INSTRUCTIONS Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes and standards (ANSI/NFPA 70) including fire-rated construction.
Page 3
Mounting bracket Before you begin installing the fan, Switch Before installing this fan make sure the Use metal outlet box suitable for fan power off at Service panel and lock outlet box is properly installed to the support and use only the screws provided service disconnecting means to prevent house structure.
Page 4
SAFETY CABLE INSTALLATION Wall switch White (Neutral) Power source Black (Live) Ground/Green Lag screw Black Blue Safety cable White Slot Washer Lock washer Install ball end of downrod into mounting For Canadian installation and for USA fan Make wiring connections using wire connectors provided as indicated above.
Page 5
Light pan Plate on motor Loosen 2 and remove 1 preassembled Connect the quick connector from fan to Loosen 2 and remove 1 preassembled screw from the plate on motor. Save the quick connector from switch house screw from light pan. Save screw for later screw for later use.
Page 6
Reverse switch Install fan and light kit pull chains to Setting the reverse switch in the left hand preassembled pull chains on fan. Pull side will result in downward airflow and chains provided. setting the switch in the right hand side will result in upward airflow.
Trouble Shooting or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, installation, please call our Customer Service Center at the number printed on your parts list insert sheet. Warning means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.