Usb Device - Sony BDV-E670W Operating Instructions Manual

Symptom
Bonus contents or other data that
are contained in a BD-ROM
cannot be played.
The unit does not work and
"CHILD LOCK" appears in the
front panel display when you
press any button on the unit.
The system menu does not work. • Press HOME on the remote.

USB device

Symptom
The USB device is not
recognized.
S-AIR
Symptom
Wireless transmission is not
activated. (The indicator of the
S-AIR sub unit flashes green
slowly or turns red.)
There is no sound from the
S-AIR sub unit, noise is heard
from the S-AIR sub unit, or
sound from the S-AIR sub unit
skips.
Problems and solutions
• Try the following: 1 Remove the disc. 2 Turn the system off. 3 Remove and
reconnect the USB device (page 33). 4 Turn the system on. 5 Insert the BD-
ROM with BONUSVIEW/BD-LIVE.
• Set the child lock function to off (page 53).
Problems and solutions
• Try the following: 1 Turn the system off. 2 Remove and reconnect the USB
device. 3 Turn the system on.
• Make sure that the USB device is securely connected to the
• Check if the USB device or a cable is damaged.
• Check if the USB device is on.
• If the USB device is connected via a USB hub, disconnect it and connect the
USB device directly to the unit.
Problems and solutions
• Check that the wireless transceiver is inserted correctly into the unit and S-AIR
sub unit (page 25).
• Confirm the S-AIR IDs of the unit and S-AIR sub unit (page 44).
• Confirm the pairing setting (page 46).
• See "If wireless transmission is unstable" (page 47).
• Sound transmission is poor. Move the S-AIR sub unit so that the indicator turns
green.
• Move the system away from other wireless devices.
• Avoid using any other wireless devices.
• If you use another S-AIR main unit, place it more than 8 meters away from the
unit.
• Place the S-AIR main unit and S-AIR sub unit closer together.
• Avoid use of equipment that generates electromagnetic energy, such as a
microwave oven.
• Place the S-AIR main unit and S-AIR sub unit away from other wireless
products.
• See "If wireless transmission is unstable" (page 47).
• Change the S-AIR ID settings of the S-AIR main unit and S-AIR sub unit.
• Turn off the system and S-AIR sub unit, then turn them on.
(USB) port.
69
GB