To add the optional surround back speakers
You can enjoy 7.1 surround sound by purchasing the Wireless Surround Speaker Kit (WAHT-SBP2,
optional). The optional product lineup differs depending on the area.
For the position of the surround back speakers, refer the illustration below (C).
Front left speaker (L)
Surround left
speaker (L)
Surround back left speaker (L)
(optional)
Note
• To use the surround back speakers, set [Surround Back] (page 51) in [Speaker Settings] to [Yes] while performing
the Easy Setup (page 28).
Installing the speakers on a wall
Caution
• Contact a screw shop or installer regarding the wall material or screws to be used.
• Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach
the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where
reinforcement is applied.
• Sony is not responsible for accidents or damage caused by improper installation, insufficient wall strength or
improper screw installation, natural calamity, etc.
Before installing the front and surround speakers of BDV-E970W on a wall, you need to disassemble
the speakers. You can install the upper part of the speakers on a wall.
Center speaker
Subwoofer
30
30
45
C
Front right speaker (R)
Surround right
speaker (R)
45
C
Surround back right speaker (R)
(optional)
15
GB