Fitting The Machine Undercounter - Sharp QW-GC12F492W-EU User Manual

CHAPTER -3: INSTALLING THE MACHINE
Fitting the machine under the counter
If you wish to fit your machine under the counter, check whether you have
sufficient space under your counter top and whether the wiring-plumbing is
suitable to do so.1 If you decide that the space under the counter top is suitable
for fitting your machine, remove the worktop as shown in the illustration. 2
Warning:The stand part which we will settle our machine under it by removing
its worktop has to be stable in such a way not to allow for a balance disorder.
To remove the worktop, remove the screws that hold the worktop which are
located at the rear of the machine; then push the front panel 1 cm from the
front side towards the rear and lift it.
EN-11